I really appreciate all the input here. I think that I am just going to go ahead and bite the bullet and go new aluminum. I had originally gone through Butler to help design a 400 hp set up. I assume I am back to square one as far as the choice of cam to go with? Here is what I was planning on running...any input on cam choice would be much appreciated! Lee
Part # BPI-K-BP8021SP
Similar to the 51-423-11 but with wider lobe separation, smoother idle, a broader power curve, and more vacuum
(HR) (Std Firing Order/ Std Journals) 276/282, 224/230, .503/.510, 114LS with 1.5 ratio rockers
Lift with 1.65 ratio rockers .553/.561
Slightly more vacuum than a 112 and produces a little smoother idle.
|