Quote:
Originally Posted by TedRamAirII
Get the flywheel resurfaced. 10.5" LUK is fine. Disassemble , Clean and lube the shifter, Replace the shifter rod bushings, check condition of universal joints and the transmission mount.
|
Sweet, perfect response, just what I needed. Only concern I have is the bolt pattern on the LUK 10.5, factory flywheel only has the 6 holes for a larger plate, and I took an 11 inch disc off. I can’t find pressure plate mounting info on the LUK to see if it uses the larger diameter mounting holes as well, my knowledge on it was that the 10.5s had a smaller bolt pattern for the smaller pressure plates thus wouldn’t fit on the stock flywheel. Since I’m getting it machined I could just tell them to add some holes lol.