421 engine build for pump gas
Hi All,
I have a 1966 WG code 421 block with 1968 #62 heads, 67 Ram Air exhaust manifolds, and a 1966 TriPower. I am looking for recommendations on how I can build this engine to run on unleaded premium pump gas but still retain good performance.
Some additional details:
- I would like to continue using the 66 tripower setup and RA Exhaust manifolds
- The car will be street driven, not raced
- The existing cam is a Crane Cams p/n 283941.
- Want the finished engine to look basically stock, but am open to using parts from different years as it will be used in a non-numbers matching car
- am open to changing heads and camshaft if these will help
Any advice or suggestions are welcome!
Brad
|