[Dick Boneske]

Thanks, b-man for the info.

I have the rebuild complete except for the pump spring. The carbs turned out well, using the NAPA rebuild kits, but, as with many kits today, the accelerator pumps are supplied without springs. I did find a spring in my Tri-Power parts that fits, but the retainer needed is smaller.

I may find a used pump with the correct spring and retainer from the info you posted.

Rebuilding these two one barrel carbs took about as long as a complete Tri-Power. I am beyond the point of no return, however.

I'll post pictures of the completed beauties!!