Quote:
Originally Posted by Skippy597
Ok so I've decided the cast stroker crank is the way to go so I'll get that on order and start piecing together the parts. But I also decided to use my hydraulic HLJ lifters instead of my solids and use the comp 51-116-3 (pretty much a RAIV cam but more lift). I think with the 1.65 rockers and everything else it should have a good bottom end and pair decently with the 336 gears.
|
The 51-116-3 has .313 lobe lift just like a RAIV. Same cam CMC grind as all the other RA4 copies, Melling SPC-8, summit’s, Edelbrock grind. ect…
I suggest spending a coupe hundred more dollars and get that SGI crankshaft. It is a lot better crank than the cheap cast cranks. It is also known as Star Galaxy…