Thread: Oil Analysis
View Single Post
  #1  
Old 07-21-2024, 09:05 PM
TCSGTO's Avatar
TCSGTO TCSGTO is offline
Ultimate Warrior
 
Join Date: Dec 2000
Location: Warren,Ohio,USA
Posts: 1,686
Default

I had Blackstone do a UOA on a fresh engine with about 2K miles on it and it had a higher level of lead also, around 50 IIRC. Copper and tin were low and everything else looked good so they pretty much told me the same thing as thy told OP.
Was running Valvoline VR-1 conventional with no additives and always ran unleaded gas.

__________________
68 GTO,3860#
Stock Original 400/M-20 Muncie,3.55’s
13.86 @ 100
Old combo:
462 10.75 CR,,SD 330CFM Round Port E's,Old Faithful cam,Jim Hand Continental,3.42's.
1968 Pontiac GTO : 11.114 @ 120.130 MPH

New combo:
517 MR-1,10.8 CR,SD 350CFM E's,QFT 950/Northwind,246/252 HR,9.5” 4000 stall,3.42's
636HP/654TQ
1.452 10.603 @ 125.09
http://www.dragtimes.com/Pontiac-GTO...lip-31594.html
The Following User Says Thank You to TCSGTO For This Useful Post: