For hard use you don’t really want a grease fitting creating a weak spot in the stressed corner of the joint.
If you do have a joint with a grease fitting it should be installed such that it’s under compression during operation rather than in tension, so attention should be paid to proper orientation of the joint during installation.
__________________
1964 Tempest Coupe LS3/4L70E/3.42
1964 Le Mans Convertible 421 HO/TH350/3.08
2002 WS6 Convertible LS1/4L60E/3.23
1966 VW Type 2 Single Cab Pickup 140hp 2276
1956 VW Type 2 Panel Van 36hp 1200
1957 VW Type 1 Beetle 180hp 2276
|