Don’t run a new motor pig rich, you’re just waring it out from the start.
Take the carb off now, remove the air horn and confirm that the power piston is not hanging up.
Also confirm that the air horn gasket is not out of place or mangled such that it’s restricting the free movement of the metering rods themselves.
After that you might find some find enough copper wire to run into the idle air bleed passages in case crap from sitting has them clogged.
I find Floral wire to be a useful size or strands of copper out of a big enough gauge copper wire.
Don’t not use strands from a Aluminum wire.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|