First place I started was setting the suspension how I wanted it. Off went the drop spindles and on went factory height spindles along with Eaton 1" taller springs all around. Also installed drag bags in the back as well as some super cool old lakewood slappers I bought from a member on here. The springs may be a little too tall but I can always trim to adjust.
One area I'm concerned with is the rear drag bags have a gap at the top. Now this is my first set but I assume they should rest against the body but there is about a 1" gap at top. I'm guessing this is from the taller springs but does anyone know if these will work or if I need a different set of bags.
|