Autotec 4032 alloy is what I used on my 434 build. You didn't specify if you need a dish or not, or what rings you want. The Autotec lets you spec anything you want for ring pack, ring placement, dish size and shape, pin placement, bore size, etc. If you can find a set of rings to fit the bore, Autotec can make the pistons to fit. Not sure who else does that.
I would not use a hypereutectic piston in anything. TRW forging is OK for a cruiser.
__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.
White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
|