It’s not the added oil pressure of the 80 psi pump ( that you likely don’t need any away!) your leak is purely age related .
Expansion and contraction from accumulated heating and cooling cycles will do that.
Folks also tend to tighten them too much which distorts there structure..
Such takes place even with vacuum switches use for example in the water crossover in the front of the motor and they never see more than 20 psi or so.
The factory sender idiot light sender case is made the same way as the 60 psi one.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
Last edited by steve25; 10-23-2024 at 07:22 PM.
|