Quote:
Originally Posted by Jeff Hamlin
If you look at this sheet you'll see two wire routing layouts.
Factory and Field.
To answer your question yes the wires are run up behind the kick.
As you see they used tape to hold everything in place, No clips.
I use black Gaffers tape, it is some of the best tape out there for this type of thing.
I like the field route that keeps the wires forward above the glove box,
it makes life easy.
 |
Yes! Thank you Jeff!
__________________
1966 GTO
1966 421-10.1-1 comp-Race Tec 23cc Pistons
KRE Tri-Power
KRE 65cc Aluminum Heads
XE274 cam by Comp Cams
DUR 230 Int 236 Exh @.050 - 110 LSA
LIFT .491" Int .491" Exh
Tri-Y-Headers by Tribal Tubes w/ Goerlich Mufflers
1966 Muncie Wide Ratio 4-Speed
1968-72 Chevy 12 Bolt Rear End w/ 3.73 rear gears
|