Quote:
Originally Posted by dataway
Over the years I've found that I end up vacuuming my shop floor rather than sweeping, seems like sweeping just stirs up too much dust.
Anyone ever seen a hard floor nozzle for a shop vac about 24" wide? For my old shop a typical 10" or so nozzle was fine, but the new shop would take forever at that size. Usually I'm just picking up a heavy dust coating.
Been playing with the idea of making my own with PVC pipe and a 3D printed adapter.
|
I also vacuum my garage floor, as I put down an epoxy coating with a clear coat some years ago. I do a quick vacuum then a quick mop. Way less dust.
I have a central vacuum port in the garage, so I use that port with a long hose. I think the hose is 1 1/4 inches in diameter, and I use a 10 or 12 inch wide floor tool to get the job done.