Correct, I am aware of frame difference but curious to know the width where sat on the floor, my hope was if it was over the ole wide-track perimeter frame but maybe not. May seem dumb but I was hoping I can have the plate weld to floor above the frame where I could drill four holes thru said plate and have a section of large angle stock it could bolt to underneath and then side bolt to the outer face of the frame vertically, on the main hoop. Just looking for a legal 7.0 index car but it will take some time, my current bracket class is 7.25+ slower and haven't been bothered running 7.2 or 7.3 or 7.4 over the last few years but needs to be right.
__________________
63 Catalina coupe 467 cid budget drag car low 11's 1/4 , 7.0's 1/8th pump gas n/a
66 Star Chief Executive 59k mile 389
67 IH Scout project 2WD "Indian Scout"
69 Le Mans 2 dr HT 350 91k mile 15 sec 1/4
69 Firebird 400 Burgandy/Black
70 Olds Rallye 350 F85 4 speed 3.91's
70 Olds Cutlass Cruiser Red Wagon 350 108k miles 15 sec 1/4 12 sec w 455
74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8
2020 RAM 1500 SLT 4x4 5.7 A8 Hemi
2008 Saab 9-3 2.0T convertible
|