Quote:
Originally Posted by OG68
I ordered a Crower HFT cam (60242) from Jegs with Cam Saver lifters.
Upon receipt of the cam I looked it over carefully and found a very small hole in a lobe.
I took it down to Crower which conveniently is just a few miles across town from me. They didn't like it either and ground a replacement for me within two days. They have a very large machine shop and it was quite interesting to watch the cam grinding process.
|
Damn shame that Crower’s quality control inspection was absent on that cam - kudos to you for finding the hole!
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
|