Finally got 12 sets of bones made. I’m keeping 2 sets and have sold 5 sets on FB in the last 24 hours.
This is the first run and possibly last depending on how this goes.
I know we aren’t supposed to sell in this spot, but there are people following this post that are interested. Hopefully the admin will let this fly for a bit so they can see it.
I designed these and work with a local machine shop to make them. These are Pontiac only. They are designed to use the sealed power HT-2148 lifter. This is commonly referred to as the “LS7” lifter. The ones that fit correctly at least on my 73 455 are the ones in the pic below. There are fakes and some revisions to this number that have been found so I included a picture of what the oil hole MUST look like to work.
This is for a set of 8 bones. Enough to do 1 V8.
You will have to put the kit together using the Ford spider and source the correct lifters. This will require a cam with a lobe lift under .340”. It will still require careful measurements to ensure the lifter oil band doesn’t go too high or too low and come out of the lifter boss.
If you know Teri Reed (Lady TaTa) she will vouch for me.
They are $200 a set shipped in the lower 48.
Either check, money order or PayPal Friends and Family. If you feel like you need to do goods and services, I have to up the price to $250. Thanks.
Stuart “Stan” Landreth
|