View Single Post
  #18  
Old 12-12-2024, 08:22 PM
Skip Fix's Avatar
Skip Fix Skip Fix is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Katy,TX USA
Posts: 21,708
Default

A Holley SD can support 600+ HP if modified like Dave at SD used to do-what the Tomahawk is basically.

The Corvette L88 base is a full 2" drop base what I have on the IA with a 4" -all that fits under the Camaro cowl.

Unless you a wanting the run deep in the 10s a T2 WILL flow enough for an average weight A body or F body. Two different motors 2 different T2s 10.90s @ 123 or 124 in good air through mufflers and tailpipes. And swapping same Demon 850 from a dual plane ported HO intake(and that ran 3 sec faster than a Qjet) idled better than the dual plane as all the cylinders saw all 4 bbls. Would be the same with a TB.

__________________
Skip Fix
1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever!
1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand
1965 GTO 4 barrel 3 speed project
2004 GTO Pulse Red stock motor computer tune [email protected]
1964 Impala SS 409/470ci 600 HP stroker project
1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs
1964 Corvette Coupe 327 4 speed
The Following 2 Users Say Thank You to Skip Fix For This Useful Post: