Based upon my own low compression stock-head 455 in a '73 Trans Am (clone), I'd suggest the 744 cam, if you can find one. I think Butler may still have some.
My cam isn't a 744, but it is somewhat close. Dyno chart attached, from a DynoJet chassis dyno (wheel HP/TQ), and the run was done on 87 octane.
I sent you a message.
Lee Atkinson
__________________
'73 T/A (sold). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 317rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'.
'67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust
|