Get yourself one of these SFI cases. I tried to use the tranny shield and could not get it installed in the car. What a pain in the A**. I tried a tranny blanket, same results. And then you still need a shield on the bell housing. I went to the JW bell housing with my first stock tranny. Next race season I went with the Reid case. There is also the speedmaster case that is alot cheaper and it's SFI approved. At the same time build yourself a catch can for the transmission vent tube.
https://www.speedmaster79.com/Powerg...0z2k7nmb4gymTK
__________________
68 Firebird. IA2 block, 505 cu in, SD Performance E-head, Solid roller 3600 weight. Reid TH400 3:90 gear. 28" slick.
Best so far 9.95@135 mph. 1.39 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exhaust
950 Quickfuel.
Last edited by chuckies76ta; 01-01-2025 at 04:53 AM.
|