Yes they will work with the stock rockers , but the added height and or the added height with the poly locks might not allow you to run the stock rocker arm baffle if you where still doing such so look at that carefully.
If need be you might get away with adding a washer under the stands of the baffle.
Also the way you adjust these polylocks
Is to make your adjustment with the outside nut .
Then back it off a bit less then 1/4 turn.
Then tighten down the center Allen set.
Then tighten the outer nut back up that little bit you spun it back from.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|