Quote:
Originally Posted by Tom63LeMans
Here are a few pictures showing crossmember and brackets for the motor mounts and midplate I used the Speedway biscuit motor mounts but then used aluminum spacers in place of the rubber mounts. With the mounts moved back like I did I might have been ok without the midplate but didn’t want to chance it. I also found a few pictures of my rear crossmember if you’re interested.
|
Can you get away with doing only the front motor mounts and the rear crossmember? Or do you also have to do the mid plate. I won’t be making that much power, probably if I’m lucky 425 hp. I’m going to be running a Th400 trans