[P@blo]

Originally Posted by Stan65

P@blo,

Thanks for the compliment P@blo

Summit has the Howard’s in stock. The issue is you will need to make sure the lifter doesn’t drop too low on the base circle and close off the feed to the oil band. It’s a super easy fix that will not affect the future changes if you swap to something else later. Just use a chamfer bit or larger drill bit to chamfer the hole just a touch. (Will need the block disassembled to clean afterwards)

Thanks again,
Stuart “Stan” Landreth




https://www.summitracing.com/parts/hrs-91174

Wow on the Howards mark up! I paid $200 for my Gaterman lifters with the original boxes 😎