Thank you for the feedback(s).
I also need to figure out the correct white color for the shaker scoop (to match the white stripe).
Some underbody coating/protection would be wise?
After getting the car back from the painter (all the body parts separately and as an empty shell), I would like some tips reg. assembly strategy.
Maybe reassemble like this(comments/suggestions)?;
1. Headliner
2. Dash
3. Front and rear window
4. Instrument cluster/under dash components incl. wiring.
5. Steering column/wheel
6. Interior parts, parcel shelf, carpet
7. Seats
8. Filler panel between rear window and trunk lid (maybe this should be #2)
9. Trunk lid
10. Engine and transmission
11. Master cylinder/booster
12. A/C unit (next to engine)
13. Doors (adjust gaps)
14. Radiator support with radiator.
15. Inner front fenders
16. Front fenders (adjust gaps).
17. Front bumper
18. Hood (adjust gaps and check with shaker height first)
19. Undercar components brake/fuel lines, exhaust, fuel tank.
Any feedback/suggestions appreciated
Cheers!
|