Hi
Vendor is ordering a new one in 2 weeks. My old one from the 90's was way too pitted inside the bore to rebuild but that is cool to know they are available. I have access to a power bleeder from my friends and will try the 10 psi once everything is hooked up. I'll pull the rubber cap to observe what happens out of pure curiosity. Thanks again for clarification.
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane
|