I put the Holley muscle car fuel module in my 66 tank. It's basically a TI 250lph pump with a holley hydramat and stock style float level. It also has a 60psi regulator on the end of the pump so it returns straight ontop of the pump and you just use the factory 3/8" line to the front. It's a very clever and clean design and it works very well too. Would I use it in a racing application? No. The stock tank is just a big flat wide chamber without any baffling, but on a street only deal i've had zero issues. The hydramat just works.
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120
'66 Pontiac GTO - 389, 4 speed street cruiser
|