Decided to install the headlights to make sure everything fits. Rather than running a '79 steering column, we're running an aftermarket earlier one, so we had to mount a high beam switch on the floor and redo some wiring to accommodate that. Was happy to see it worked like it should! The LEDs are nice and bright.
We thought we were going to have to fabricate a custom splined sway bar to clear the front tires, but we decided to try the updated version of Ridetech's sway bar first...at full turn we have 5/16" clearance on both sides, so should be good to go. If we get a little rubbing, can also adjust the wheel stops a little.
All we have left on the exterior is the chin spoiler, and grills, and on the interior we have door panels, carpet and seat belts. After that charge the A/C, alignment, polishing, then decals. We'll drive it a bit then another tuning session. Almost there.