Quote:
Originally Posted by Baron Von Zeppelin
Source a junky later 70s bezel and experiment with it.
Supposedly a good application or two of Easy-Off oven cleaner removes the old clear coating.
Then you neutralize it ,
Prep-Sol
De-lint
Respray high end clear coat.
Or , wait on Randy Combs to do it professionally.
I would not lay a finger on an early bezel until I had experimented with another one of little value.
|
I believe I was able to get the yellowing original clear coat off mine with lacquer thinner. And then just carefully cleaned/degreased, and re-cleared it. But I would definitely experiment on a junk part first.