Looks like a fun project.
In addition to steve25's advice to remount the oil filter right-side-up, I'd offer my advice to toss that Fram filter in the nearest garbage can. They've got a history of collapsing internally under pressure and have been the cause of more engine failures than you can count.
And you need the filter oriented correctly or it could drain all your oil into the pan when you turn the engine off. That's not a good thing.
Get a decent filter from Wix or NAPA or Baldwin to replace it. I'd guess that the filter base probably does NOT use a normal Pontiac-spec filter, so cross-reference the Fram number to purchase a replacement. Many of those remote bases fit either Chevrolet or Ford-style filters.
I can also confirm that the Torker is not an optimal intake for a 350cid engine.
ANY factory cast-iron quadrajet intake from 1968-1972 will work with your heads and will be much more driveable and make more usable 'torque' on your engine than that 'Torker' intake ever will.
If you prefer the aluminum intake idea, a Holley Street Dominator works really well or the Edelbrock Performer will do the job.
Have fun!
|