350/413 stroker with 9.3 CR
6X-4 Heads
Comp XE276HR w/1.5 rockers
800cfm Q-Jet
442 LB FT@4300
453HP@5600
I'm happy with my port matched Torker-I. Give it a chance with a good carb.
Haven't had a chance to run it down the strip yet, but with a 2600 stall converter and 3.23 gears it will spin the tires all the way through 1st gear. Well, I should say it would until the intermediate sprag detonatated in the transmission.
