The bolt pattern is different on each frame mount so you can’t mix them up.
If you were able to bolt them down to the crossmember they’re on where they should be.
However with that said it appears from this picture of my Tempest engine bay the driver’s side frame stand is the taller one.
__________________
1964 Tempest Coupe LS3/4L70E/3.42
1964 Le Mans Convertible 421 HO/TH350/3.08
2002 WS6 Convertible LS1/4L60E/3.23
1966 VW Type 2 Single Cab Pickup 140hp 2276
1956 VW Type 2 Panel Van 36hp 1200
1957 VW Type 1 Beetle 180hp 2276
|