Thread: Opinion on subframe powder coating
View Single Post
  #4  
Old 06-25-2025, 09:36 PM
Goatracer1 Goatracer1 is offline
Ultimate Warrior
  
Join Date: Oct 2003
Location: NH
Posts: 4,265
Default
If you are going to do it pre-assemble everything first. Check that everything is ABSOLUTELY correct. then disassemble and powder coat. If you have to make alteration you must do it before coating.

Reply With QuoteReply With Quote
The Following User Says Thank You to Goatracer1 For This Useful Post: