Quote:
Originally Posted by Mikael Nielsen
I have now removed all the rod bearings and pistons. It's almost the same on all of them.
I measured the crank play before I removed one of the main bearings. It showed 0.0078 inches.
I have attached a picture of the bearing and crankshaft. I guess I have to order new main bearings also with new bolts..
I could not find any information on the cam, so I measured the height of the intake and exhaust cam to 0.275 inches.
I have calculated the CR value as good as I can to 7.72:1
I have attached a photo of the data I have used.
Thank you everybody.
|
You are not going to need new main bolts. The old ones, if OEM will be fine.