Brake pedal
Sensor on other side of the pedal arm (mini flash light looking thing threaded into the bracket)
This sensor body can be turned in or out and adjust the tip
There's supposed to be a gap between the two so that when you're not on the pedal the sensor male comes 100% out.
Yours might be touching the pedal at all times causing the light to go on. I had this issue last year after some brake work and luckily caught it before 24 hours and full battery drain.
__________________
69 GTO Convertible, 4000lbs
462ci, 606tq/569hp - 93 oct @ 34 deg (207psi)
11.7:1, KRE H Ports, Lunati HR 282/290 w Johnson Lifters & 1.65 Scorp, E30, EFI, Holley HP + Dual Sync, 12-1 Crank Trig, 120lb Inj & 1000cfm TB, Torker II EFI Int & Rails, PTC 10", Rock Valley SS Tank, Dual 450s, Aerom EFI Reg, Aero Front & Wilwood Rear Disc Brakes, Dougs 1 7/8" & Borla Pro XS 3", Alum Rad & Dual Fans, 12:1 Box, UMI Arms & Viking Berz Fr + Rear CO Shocks, Hella UP5.0 Vac Pump, 12 Bolt, 3.73, 33 Spline
|