Going with carb mounted kickdown switch location
I have been on a bracket shopping frenzy. I am replacing the throttle cable bracket because not only is it from an A body engine, I also hacked off the end that bolts to the intake manifold.
I am installing the correct coil bracket that attaches to the correct throttle cable bracket to get the coil off the firewall to where it belongs.
I am going to use a brake switch mounted in the kickdown switch bracket. It should work. There are other switches that are available that are built more robust and water resistant, but I will start off simple and dial in the brake switch first.
Thank you all for the assistance.
|