Quote:
Originally Posted by PAUL K
Looks like your doing good..... If it's still set up check the numbers fifty thousandth before and after peak lift .... Those are the ones that will tell you the lobe centerline..... It's normal to be off a number or two from the cam card
|
i left it all set up, so im gonna double check again. seems i was able to find the center of the intake lobe easy, but not tge exhaust. but it was late too.
also, i wish i had checked sooner but while i was at it, i measure the deck clearence. looks like these pistons are .019 in the hole. so if i used edelbrocks .038 gaskets i would still have a quench of
057 which from what i read isnt good. the heads are 78cc speedmasters putting it around 10.5xx cr
do you think it will detonate on premium? or should either pull apart and shave .010 or try the .027 cometics? ive not seen any other options besides the cometics