propuckstopper - I did see your recommendation and got a quote. I simply can't justify the custom cost, even if I don't get what I want with off the shelf Moog or aftermarket.
Quote:
Originally Posted by 59safaricat
Front Coils Moog 5390..
Rear Coils Moog 6319
|
I chased this PN down and it seems another good candidate that might put the height somewhere between the 5401 and 5413, although the stiffness is a little lower than 5401.
Here's a photo posted by 68WarDog of his car with 6319:
Was posted here:
Link to another thread
Anyone else use this on a 70 with 14" wheels and ~26.5" tires?
I also see UMI sells a stock height spring with a rate of 130 lbs/in, which is in between 5401 and 5413. They cost more than Moog, but less than Coil Spring Specialties and are likely to be exactly what they say vs what may be a quality crapshoot with Moog parts.
And I like the model UMI chose for their web page:
I also read several threads about variable rate springs like CC501 but I want to stick with constant rate.
Mike