I ran the 2 16an lines through the firewall, along the floor, and out the back.
I used a 16an thermostat housing and a Meziere 1.75" to 16an adapter along with a short piece of 1.75" silicone hose on the engine side.
I cut off the radiator hose nipples and welded aluminum plate over the holes. Then I welded 2 16an nipples for the lines and a 12an nipple for the fill line.
I welded aluminum angle to the sides of the radiator and used 3/8 threaded rod to hang it. I also added 1/4-20 threaded weld bungs to mount the trans cooler.
|