Quote:
Originally Posted by dataway
I used a Melling SPC7 and Melling lifters in mine, fine so far. It was my second attempt, first was Melling SPC7 and Johnson lifters, had a couple of lifters that wouldn't turn, caught it while still on the engine stand.
I'm big on getting your cam and lifters from the same manufacturer.
|
Happy to hear this I used a melling RA IV cam recently haven’t run the engine yet but hoping for no issues obviously
__________________
Happiness is just a turbocharger away!
960 HP @ 11 psi, 9.70 at 146.
Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug!
selling turbos and turbo related parts since 2005!
|