Sorry, I don't know how difficult the parts may be to get into the country. But our sponsor Ames, lists both sides in stock. Rock auto lists the right side only in stock from Pioneer. Seem to be readily available all over E-bay as well.. Trying to work with what you have, Probably need to set the mounts in a mill and clean out the hole as deep as you can. Then run a bottoming tap into the cleaned out holes. I would think you would want a minimum of .500 of actual thread engagement. That's the minimum recommended for a 1/2" bolt. You could grind off the pilot area off the factory bolt to gain a little engagement. The pilot is just an assembly aid on the line.
|