Deluxe foam is needed to match deluxe covers unless modifying standard foam
When I changed the standard seat covers to deluxe, I found that the standard foam did not have the same shape that was needed to hog ring the deluxe covers to seat frame.
I also wanted to change standard door panels to deluxe but the inner door handle would require a change as well.
I wasn't sure about the deluxe handles being the only change as they are extended out and then up to open the doors.
While the seat frame was bare, I took the opportunity to fix the springs that are broken. The locations are on the rear corners. The springs are shown in vendor's catalogs in the interiors section. It must be a common practice to repair.
|