Quote:
Originally Posted by Flashflood
You mean for the turn single switch? All I need to do is get the lock plate off and I'm in there. What else needs to be done? I figured I get this done while replacing the key.
Also any good hints on how to get the snap ring to the lock plate off i have the tool that compresses the plate.
|
No I meant the 4 screws that hold the bearing housing, There is a cheap lock plate removal tool available that pushes down the lock plate make it easier to remove the snap ring ( or C-clip ) it also makes it easier to reinstall.
https://www.summitracing.com/parts/wmr-w80649
I have a couple of them and they do make the job easier. But not absolutely needed.
__________________
Jeff R
60 Jaguar Mark 2, 3.8L Automatic
67 Sprint Firebird 230 OHC-6 4-Speed A/C
1971 Fiat 130 Coupe 3.2L SOHC V6, ZF 5-speed
78 Catlina Safari, Pontiac 400 powered
77 Astre Formula, 215 Buick V-8 T-5
73 Lemans Safari, 400 4bbl 4-speed
71 Catalina Enforcer, 455 4bbl
05 Dodge Magnum 3.5L SOHC V6
06 Mallet Solstice #024 LS2, Now with a Tremec 6060 6-speed!
2012 F-150 Echo Boost (My local Ford Dealer SUX!!!)
2020 Dodge Charger Scat pack (recovered)
|