Quote:
Originally Posted by pngoat
Check the big balancer hub bolt for looseness. Should be 160 lb. ft. Next check the bolts that hold the balancer itself and the pulley to the hub. Should be 25 lb. ft. Also check the power steering (if equipped) pulley. Should be 70 lb. ft.
|
Yes, check on this suggestion. It cost you nothing to check. I had the same kind of noise in the front of my motor. Sounded like a bearing noise, or as I put it, marbles in a can making noise. I took the valve covers off and checked the rockers and it was not that. So I changed the water pump because it sounded like a bearing noise, it wasn’t that. Then I went to check the balancer, and it was the four bolts holding the pulley’s on. The bolts were almost sheared off. I was lucky to catch it before everything in the front of the motor let loose. Good luck…