Pull all galley plugs, have them tap & thread the front two openings behind the timing chain for shallow pipe plugs. They will need to “fit” the cam to make sure it rotates well after the cam bearings are installed. Assuming this is a shop knowledgeable with Pontiac engines?
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
|