Quote:
Originally Posted by charlie66
So, am I understanding this right. When you use a roller cam and lifters you will not use a bypass in the housing and you will block it off? I'm asking because I'm using a roller cam in the build I'm doing now, and I'd like to know what's the best way to go.
Thanks
|
I don’t a run an external bypasses on roller cams. I block it and either run an internal in filter bypass that has a higher pressure differential (9-15 if a filter is available), or no bypass and make sure the pressure is measured after the filter. I try to keep full filtered oil in the oil galleys the best I can on all the roller setups.