Quote:
Originally Posted by dataway
A little off topic but .... how hard is it to replace that blend door actuator? I've got a 2011 GMC truck and it still works, but it's getting pretty sticky.
|
It's right next to the transmission hump on the bottom right of the box. 2 screws and 1 locating pin. Pretty easy without a central console. If you have a console, one screw that holds a long plastic cover over all that stuff is a bitch to get to. That long cover is held up by 3 screws total. The actuator screws are 5.5 MM heads, so you need that tiny socket 1/4" drive. A thumb ratchet is helpful too.