Quote:
Originally Posted by Kenth
|
Thanks- all of these are 3/8 and the hole is 5/16 (.312). I tried one of 3/8 variety for S&G and confirmed.
Quote:
Originally Posted by sdbob
I read on line the size is id is.375. Dorman makes one try local parts store. Also measure your hole, might be tight .375. I googled 12 bolt . 312 vent. Was talked about.
|
The .312" valve is what I need but apparently, it's constructed of unobtanium
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
|