flywheel measuring issue
Maybe some of you math type guys can figure this out for me, doing my measurments they come out to a hair more in the example im posting.
So instead of 0.110 in example im gettin 0.112
So do i need to get a adjustable pivot ball, ive had this in the car for couple years with the 5 speed, seemed like everything worked ok.
Well, got the motor back the other day, used the same flywheel, brand new this time, but there was a scratch in it so i had it resurfaced, bad part its already on the motor.
The example showing the numbers is with the old flywheel, all stock mech linkage and bellhousing. The flywheel is a prw sfi 1645500.
Doing the measurment on the bellhousing as best i could seems im short about 1/16 of a inch.
Hoping i can take one bolt out of the flywheel that is on the motor now and get a measurment........................whats ya guys say, adjustable or go with this.
Thanks Rich
|