[Held for Ransom]

I had little problems pulling my speaker, but mine is a non-A/C, non-console car.
One screw holds the bracket that holds the speaker in place. Unplugging the radio and press the tab on the green wire terminal releases it. Ground is thru the body of the speaker. I made a new green wire and soldered it on the one terminal of the speaker. I attached a Packard series 56 female terminal to the end that inserts into the radio connector. You will have to use all crimps over there. A black wire with crimps on both ends (should be in kit) plugs into the speaker terminal and I connected the other end to the attaching screw.
I'd love to see the ink stamping after you've pulled them.