View Single Post
  #2  
Old 04-27-2026, 05:28 PM
unruhjonny's Avatar
unruhjonny unruhjonny is offline
Ultimate Warrior
 
Join Date: May 2004
Location: Calgary, AB, Canada
Posts: 6,835
Default

Edit:

For further clarity, I found this part in one of my Novemeber 1974 print date Firebird Master Parts Catalogs here;
Group 12; Illustration 6; item number 39;
Panel Assembly; Shroud vent duct - side: 12.804
---
Quote:
12.804: Panel, Shroud vent duct side;
1) 8782297 8782298 1970-75/all-primed
12.804: Panel, Shroud vent duct side and weld nut;
1) 9739594 9601757 1970-74/all sup 9739686-RH
1) 9739594 9739595 1975/all-primed
These are listed like this in my MPC, I am guessing that the second listing only differs from the first in that it has included the weld nut which I believe is for the bottom/rear fender bolt.

The weld nut can be seen in all three attached pictures from my prior post (you would be correct if you guessed that the fender bolt broke in the weld nut).

__________________
1970 Formula 400
Carousel Red paint on Black standard interior
A no-engine, no-transmission, no-wheel option car.
Quite likely one of few '70 Muncie three speed Formula 400's left.


1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing)
2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs)