Quote:
Originally Posted by HWYSTR455
The Mishimoto stack plate coolers are very good, as are the Earl's ones. They can take hits from road debris and stay intact.
I like Nightmare stuff, but I personally would run better fittings. The Aeromotive tapered fittings flow much better, less restriction (true to size passage), and have less of a psi/flow drop. Compare them to others and the difference is very obvious.
It's crazy how much even name-brand fittings neck down in the passage, and it can force you to go up a size. In general, for oil, you don't want to run 90s. If you have to run a 90, run one of the Aeromotive ones (hose fitting), but due to the radius, you may not be able to.
Some headers have a tube that gets very close to the block where the filter housing adapter is, so you need to be careful of that.
Just some of my personal experience(s) I'm sharing...
.
|
Hard to believe Darrin runs those "hard 90" fittings on the remote filter mount.
These are a better deal if you need a 90 and don't have much room. A lot smoother and no O rings to leak, generic Amazon deal. I have a couple on my fuel system and no leaks
.
https://www.amazon.com/dp/B0CKBYNLH3..._title_26&th=1